Baseball Laces Design Tutorial

1. Pick 2 different colors. (The example uses white & red). You will need 5 strands of white & 1 strand of red.
2. Align string, fold in half, and tie knot ½ inch from fold forming a loop.
3. Attach your ½ inch loop to MYFBM under the butterfly clip.
4. This pattern uses 12 strings which is exceeds the amount of slots that the MYFBM holds. You will need to have a loose string on each end. The string hanging loose on the left hand side will be referred to as #0. The loose string on the right will be referred to as #11. Separate strings by placing one string per slot. Note: Use the same color in slots 0, 1, 2, 4, 5, 6, 7, 9, 10 & 11 (white) & slots 3 & 8 (red).

Row 1:
5. To begin take string 0 and make a right hand double knot on string 1
6. Take string 3 and make a single left single right hand knot on string 2.
7. Take string 4 and make a right hand double knot on string 5.
8. Take string 7 and make a left hand double knot on string 6.
9. Take string 8 and make a single right single left hand knot on string 9.
10. Take string 10 and make a right hand double knot on string 11.

Row 2:
11. Take string 2 and make a left hand double knot on string 1.
12. Take string 3 and make a right hand double knot on string 4.
13. Take string 6 and make a left hand double knot on string 5.
14. Take string 8 and make a left hand double knot on string 7.
15. Take string 10 and make a right hand double knot on string 9.

Row 3:
16. Take string 1 and make a left hand double knot on string 0
17. Take string 3 and make a left hand double knot on string 2.
18. Take string 4 and make a single right single left hand knot on string 5.
19. Take string 7 and make a single left single right hand knot on string 6.
20. Take string 8 and make a double right hand knot on string 9.
21. Take string 11 and make a double left hand knot on string 10.

Row 4:
22. Take string 2 and make a left hand double knot on string 1
23. Take string 3 and make a right hand double knot on string 4.
24. Take string 5 and make a right hand double knot on string 6.
25. Take string 8 and make a left hand double knot on string 7.
26. Take string 10 and make a left hand double knot on string 9.

27. At this point your pattern will now repeat itself. Repeat steps 5-26 to continue the pattern until your bracelet is long enough to fit your wrist.
28. Once your bracelet is long enough to fit your wrist take strings from the slots 0, 1, 2, 3, 4 & 5 and make a braid.
29. Take the strings from slots 6, 7, 8, 9, 10 &11 and make a second braid.
30. Take the braided strings and tie two basic knots at the end of your friendship bracelet.
31. Unclip your friendship bracelet from the butterfly clip and cut off the excess braided section. Your friendship bracelet is ready to wear or share!